Review the last first 4.0 polygon 2015, bicycle output polygon with comb between mid-sized down.
Bikes at affordable prices with relatively cheap prices.
On
this occasion, the arenasepeda.com will try to give an opinion on the
last first 4.0 Polygon 2015 as well as the specifications and the price
Polygon Premier 4.0 last 2015 to you as follows.
Framework
To
frame this bike using Alutech alloy cross country, 10X135MM. Polygon
provides the frame with aluminum material with good performance, as well
as the framework that is dedicated to exploring the terrain difficult
terrain.
Front Fork
Polygon
as a worldwide bicycle manufacturer who have not forgotten pin front
fork SR xct Tower, 100 mm travel, standard steerer to Polygon premier.
In the specification the front fork is pretty good.
Steam, seatpost and handlebars
For
the steam, the seatpost, the handlebar and the first Polygon 4 uses
entity OE, alloy, 80 mm (S-m), 100 mm (L) for steam, OE entity, alloy,
27.2 27.2 27.2x350mm for handlebars, and OE entity, alloy, 680 for
handlebars. In the quality of the already qualified and hard enough for
you to use.
Rear derailleur and rear Derailer
As
for the FD & Rd Polygon First 4 uses a Shimano FD-m190 fd specs,
for him. As for Rd 4 Xtrada polygon using the Shimano Altus Rd-M370SGS.
In the specification are not quite bad, but also not good enough.
Shift Lever
For
the specifications of Polygon 4 first shifter uses a Shimano Altus
SL-m310. Not very different Kemampuanya with FD & Rd. Third
combination system lever is a little less enjoyable.
Brakeset
For
the first Tektro Auriga polygon bark system, using the hydraulic disc
brake. In the system is pretty good, with the system automatically the
levels Hydroulic Kepakeman pretty good.
Pedal
For
the specifications of the Shimano FC Polygon Crankset uses 4
premier-M131 42X34X24T, 170. Good enough for the bicycle size polygon
with a small shake.
Whellset
Account
for the specification Whelset, Polygon 4 premier use/ban of the tyres
deli, 27.5 "x 2.10", and supported with spoke stainless steel rays. With
hub alloy hub, 10X135MM at the back and alloy hub, 9X100MM for the
future.
Disadvantages and benefits of Polygon Premier 4.0:
-Deficiency
-The shapeshifters are not good enough, but also not bad enough
-Rd and FD is not good enough either. In the specification is still low.
+ Advantages
+ Nice, sturdy frame and gadil.
+ Brake Set is nice, already uses the system, allowing a brake hydroulic more paken.
+ Front fork is pretty good.
+ Wheel already use the size 27.5 specification which is pretty good.
Conclusion
After
we review the last 4.0 first 2015 polygon and the specs and the price
also first 4.0 last 2015 it was time to conclude how polygon first 4.
Overall, the bike is pretty good, with the price of the first Polygon
4.0 last 2015 IDR 3 650 000 This bike is probably cheap is also not
cheap. Considering the Ditawarkanya specifications, although there is
still one side that needs to be repaired.
So
that the review of the last 4.0 first 2015 polygon and the Polygone
specifications and prices of the last 4.0 first 2015 of arenasepeda.com
can be useful. Thank you.
0 Response to "Review Polygon Premier 4.0 Terbaru 2015"
Post a Comment